Are you one of the lucky few that has a bonafide HK MP5? Maybe you have an MP5 clone or some other lookalike like Zenith Firearms’ American-made MP5 (the ZF-5)?
If so, if you take it to the range enough, you’ll eventually be needing some high-quality MP5 parts.
Like these:
MP5 Firing Pin Kit
Zenith Firearms’ MP5 firing pin kits are made in the United States from premium steel and are treated with an FNC (ferritic nitrocarburizing) finish that improves their general durability and corrosion resistance.
They also come with a high-strength chrome-silicon spring and are ready to install in your ZF-5, MP5, or other 9mm roller-delayed blowback platform.
MP5 Guide Rods
Don’t just replace the guide rod, install a whole new assembly. Zenith Firearms’ is machined from high-strength steel and finished with a manganese phosphate coating to protect it against wear and corrosion.
This assembly also comes with a high-cycle recoil spring that has been extensively tested for reliability, even with high-pressure ammo.
MP5 Barrels
Your MP5’s barrel is probably fine – that is, unless you’ve run 50,000 rounds through it. If so, it might be time for a change.
Rifling wears down naturally over time, adversely affecting accuracy. Zenith Firearms’ MP5 barrels make the perfect replacements.
They are cold hammer forged from mil-spec 4150 CMV steel and finished with an FNC treatment for wear and corrosion resistance. They’re also threaded so you can add muzzle attachments.
MP5 Extractor and Hammer Springs
They’re not the most exciting MP5 parts, but they are often the first to go. Fatigued springs are often the first culprit when you experience some sort of mechanical failure.
Zenith Firearms’ extractor and hammer springs are made to a high standard of quality and are the perfect replacements when you notice inconsistencies in your gun’s extraction or firing.
Picatinny Rail Adapter
Designed to mount on the receiver of the MP5, ZF-5, and other similar platforms, this adapter is perfect for anyone that wants to add a little spice to the vanilla of their roller-delayed blowback platform.
It gives you plenty of real estate for mounting optics, red dots, and other sights, that can revolutionize the functionality of your MP5-style platform.
MP5 Magazines (OK, So It’s Not a Part, Keep Reading)
Just hear this out. We know it isn’t technically an MP5 part – but it’s worth the investment and probably an upgrade from what you’re currently feeding your gun.
Zenith Firearms’ MP5 magazines feature superior welds, all-steel construction, and are finished with an electro-plated coating to fight wear and corrosion.
They are also made with reinforced feed lips, a stainless steel follower, and even feature round count indicator holes – and are compatible with MP5, ZF-5, and other popular subgun platforms.
Get a few and thank us later.
Where Can You Get These and Other MP5 Parts?
Looking for MP5 parts like these, or do you need something else?
Either way, the place to get it is online at ZenithFirearms.com. They carry these and other high-quality MP5 parts that are compatible not only with that platform but with their own ZF-5 and other similar roller-delayed blowback firearms.
Visit their website to learn more or get in touch with them at [email protected].
